![]() |
Hunza
Landscape Lighting Handcrafted in New Zealand Timeless & Contempory Designs Engineered from Quality Materials Distributed by Rowan Almond Limited ~ The Landscape Lighting Site |
Path
Lighting The small pools of light are down at your feet, right where you need it to safely lead from one location in the landscape to another. You see the effect ~ not the source. |
|||
Bollard
Prices
from £76.00 |
The
300mm Bollard is ideal for gardens whereas the 700mm is more suitable
for driveways, walkways, car parks, etc. Click
here to download Specification Sheet for Bollard
300 |
||
Fern
Lite Prices
from £55.00 |
The
Fern Lite is suited to low level foliage.
Suitable for use with a G4 bi-pin halogen lamp 5, 10 or 20 watt and is supplied with a high quality European lamp. Click here to download Specification Sheet for Fern Lite |
||
Deck
Lite Prices
from £55.00 |
The
Deck Lite produces the same effect as the Fern Lite but is for mounting
to decks, tiled areas, brick walls, etc. Suitable
for use with a G4 bi-pin halogen lamp 5, 10 or 20 watt Click here to download Specification Sheet for Deck Lite |
||
The
Tier Lite is suited to medium level foliage. It is mounted atop a 700mm
pole. Click here to download Specification Sheet for Tier Lite |
|||
The
Border Lite is ideal for path lighting giving a wide spread of light with
no upward projection.
This luminaire
has a fully adjustable arm allowing 360 degree rotation and 0 - 90 degree
elevation. It is solidly constructed from cast aluminium with a UV stable
powder coated finish (standard colours bronze, green, matt black and
silver). It has a tempered glass lens and a silicon gasket. The fitting
is mounted onto a head which is secured by a stainless steel grub screw
to an 850mm pole. Suitable for use with an G4 bi-pin 20 watt lamp or GY6.35 bi-pin 35, 50 watt lamp and is supplied with a high quality European lamp. Click here to download Specification Sheet for Border Lite |
|||
The
Path Lite is ideal for lighting flat areas, decks, paved courtyards, edge
lighting paths. This luminaire has a low profile (20mm) and directs light horizontally via a stainless steel reflector cone through a frosted glass lens to reduce glare. Available with 1, 2, 3 or 4 facets for light to be projected through. The Path Light 2 facet may be used as a Step Lite in a wall or fence, etc. to shine light up and down as it protrudes only 20mm. Machined from a solid block of copper or 316 stainless steel with stainless steel reflector, frosted tempered glass lens and high temperature silicon gaskets. For use with an MR16 - 20 watt lamp and is supplied with a high quality European 5000 hour lamp. A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation. This changes the luminaire to an IP66 rating. Click here to download Specification Sheet for Path Lite |
|||
The Twig Lite has a subtle appearance, which allows it to blend into taller foliage. The luminaire has a frosted glass lens to reduce glare and is best operated with a l0 or 20 watt halogen lamp. "Retro" version available with integral transformer.Suitable for use with a G4 bi-pin halogen lamp 5, 10 or 20 watt and is supplied with a high quality European lamp. Click
here to download Specification Sheet for Twig
Lite |
|||
The
Walkway Lite is specifically designed to illuminate walkways without any
glare being transmitted to the eyes.
The luminaire has a frosted glass lens to further reduce glare and is best operated with a 1O watt or 5 watt halogen lamp. Constructed from solid copper with a solid brass elbow and stainless steel grub screws, and is only available in these materials. "Retro" version available with integral transformer. Suitable for use with a G4 bi-pin lamp 5,10, 20 watt and is supplied with a high quality European lamp. Click
here to download Specification Sheet for Walkway
Lite
|
|||
Links
to the Hunza Landscape Lighting Pages |
|||
|
Links
to the TLLS Collection Pages
|
|||