![]() |
Hunza
Landscape Lighting Handcrafted in New Zealand Timeless & Contempory Designs Engineered from Quality Materials Distributed by Rowan Almond Limited ~ The Landscape Lighting Site |
Hunza
Step Lighting Discrete small fixtures reliably illuminate just where required, making steps and stairs safe and convenient to use in low light conditions. |
|||
Step
Lite Solid Eyelid SLS
CLICK TO ENLARGE Prices
from £108.00 Click below for application examples of the Step Lite Solid Eyelid |
The
eyelid masks two thirds of the lamp which eliminates all upward light. Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes. The eyelid masks two thirds of the lamp face, eliminating any upward glare. The body is machined from 63.5 x 10mm and the flange from a solid block of aluminium 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white), or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Solid Eyelid |
||
The eyelid masks two thirds of the lamp which eliminates all upward light.
The Step Lite Solid Eyelid Square flange has a 88mm x 88mm smooth machined square finish without mounting holes to disrupt the elegant line of the luminaire and is designed to fit into a mounting canister. Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes. The eyelid masks two thirds of the lamp face, eliminating any upward glare.. The body is machined from 63.5 x 10mm and the flange from a solid block of aluminium 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white), or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Solid Eyelid Square |
|||
Step
Lite Low Lux SLLX
CLICK TO ENLARGE Prices
from £82.00 Click below for application examples of the Step Lite Low Lux |
Low
Lux Step Lite is particularly useful where a very low light level is required
creating an intimate ambiance.
The flange covers the majority of the lampface reducing the light level by approximately 70%. Solidly constructed from 63.5 x 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white) or solid copper, complete with clear tempered glass lens and silicon gaskets. The standard low voltage products are suitable for use with an MR16 - 20 watt lamp and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Eyelid is secured to the flange by two screws. As standard the fitting will be supplied with mounting holes. Although, if a canister is to be used there would be no need for the holes in the flange. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Low Lux |
||
Step
Lite SL
CLICK TO ENLARGE Prices
from £73.00 Click below for application examples of the Step Lite |
For illumination of steps and ground level horizontal lighting, for example,
across driveways or exterior paved areas. Step Lite is designed with a 88mm flange for flush mounting into masonry, stone or wood. For step lighting and ground level horizontal lighting, for example, driveway lighting or exterior paved areas. Alternatively use as a recessed up lighter! Machined from 63.5 x 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click
here to download Specification Sheet for Step
Lite |
||
For illumination of steps and ground level horizontal lighting, for example,
across driveways or exterior paved areas. Step Lite Square is designed with a 88mm x 88mm square flange for flush mounting into masonry, stone or wood. For steps lighting and ground level horizontal lighting, for example, driveway lighting or exterior paved areas. Alternatively use as a recessed up lighter! Machined from - body 63.5 x 10mm and flange from 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, white and silver) or solid copper or 316L stainless steel, tempered glass lens and high temperature silicon gaskets. The standard low voltage products are suitable for use with an MR16 - 20 watt lamp and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Square |
|||
Step
Lite Louvre SLLU
CLICK TO ENLARGE Prices
from £159.00 Click below for application examples of the Step Lite Louvre |
When
using stairs there is no blinding glare or sparkle from the 20 watt
lamp to irritate the eyes. The body is machined from 9mm solid copper or 316 stainless steel, it has a tempered glass lens with high temperature silicon gaskets and is supplied with a maximum 20 watt lamp. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Louvre |
||
When
using stairs there is no blinding glare or sparkle from the 20 watt
lamp to irritate the eyes. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. .Click here to download Specification Sheet for Step Lite Louvre Square |
|||
Step
Lite Eyelid SLE
CLICK TO ENLARGE Prices
from £82.00 Click below for application examples of the Step Lite Eyelid |
Eyelid
Step Lite eliminates all upward light.When using stairs there is no blinding
glare or sparkle from the lamp to irritate the eyes.
The Step Lite Solid Eyelid flange has a smooth machined finish without mounting holes to disrupt the elegant line of the luminaire and is designed to fit into a mounting canister. Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes. The eyelid masks two thirds of the lamp face, eliminating any upward glare. The body is machined from 63.5 x 10mm and the flange from a solid block of aluminium 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white), or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Eyelid |
||
| Step
Lite Square on Square is designed with a 88mm x 88mm square flange for flush
mounting into masonry, stone or wood. For steps lighting and ground level
horizontal lighting, for example, driveway lighting or exterior paved areas. The body is machined from 9mm solid copper or 316 stainless steel, it has a tempered glass lens with high temperature silicon gaskets and is supplied with a maximum 20 watt lamp. The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating. The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations. Click here to download Specification Sheet for Step Lite Square on Square |
|||
| |
|||
The
shape is pleasing to the eye and blends unobtrusively into any situation. Individually cast in bronze, each luminaire has a unique finish and identity and the 316 Stainless Steel has a smooth machined finish both with frosted tempered glass lens and high temperature gasket. Suitable for use with a G4 bi-pin lamp - 5, 10, 20 watt and is supplied with a high quality European lamp. Click here to download Specification Sheet for Mouse Lite |
|||
It has a strong square shape suited to present day installations.
There is no light directed upward or forward into the eye. A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity. Individually cast in bronze, each luminaire has a unique finish and identity and the 316 Stainless Steel has a smooth machined finish both with frosted tempered glass lens and high temperature gasket. These low voltage luminaires are suitable for use with a G4 bi-pin lamp - 5, 10, 20 watt and is supplied with 20watt a high quality European lamp. Click here to download Specification Sheet for Mouse Lite Square |
|||
|
Prices
frpm £187.00 |
The
Mouse Lite™ LED is a solid bronze or solid 316 stainless steel luminaire
for surface mounting. Available in both shapes. A versatile product that
can be used in many ways; mounted horizontally for path lighting or deck
lighting; mounted vertically for downlighting over a doorway or uplighting
a wall mounted feature. Ideal for installation in public areas or difficult
to access places due to the low maintenance and long life of the array.
Individually cast in bronze, each luminaire having a unique finish and identity, and 316L Stainless Steel which has a smooth machined finish both with frosted tempered glass lens and high temperature gasket. These luminaires are supplied with high output 2 x 1.2 watt Warm White LED arrays. Available with or without integral drive. If opting for the remote driver option, we advise the use of our 4 or 10 watt Litech remote drivers having 230V direct connection. The 10 watt can run from 1 to 4 fittings per unit and the 4 watt can run from 1 to 3 fittings. Click
here to download Specification Sheet for Mouse
Lite LED
|
||
Links
to the Hunza Landscape Lighting Pages |
|||
|
Links
to the TLLS Collection Pages
|
|||