 |
Hunza
Landscape Lighting Handcrafted in New Zealand Timeless & Contempory Designs Engineered from Quality Materials Distributed by Rowan Almond Limited ~ The Landscape Lighting Site |
Uplighting It's never seen in nature, so its unusual effect demands attention. Uplighting is dramatic and usually reserved for highlighting focal points. |
|||
This
luminaire is ideal for illuminating bushes and trees from ground level
or moonlighting from a tree using a Hunza® Tree Mount Adaptor Kit.
It has a fully adjustable head allowing 360 degree rotation and 0 - 90
degree elevation.
Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. Suitable for use with an MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Click here to download Specification Sheet for NPS Spot |
|||
| A
luminaire designed for easy insertion into the earth, and to be aimed at
a bush or tree. Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. Suitable for use with an MR16 - 20, 35, or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Click here to download Specification Sheet for Spike Spot |
|||
| This
luminaire is easily inserted into the ground and has a fully adjustable
head allowing 360 degree rotation and 0 - 90 degree elevation.
Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green ,matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. Suitable for use with an MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Click here to download Specification Sheet for Spike Spot Adjustable |
|||
| Twin
Bar Lite TBL  CLICK TO ENLARGE Prices
from £107.00 |
Two
individual spotlights which can be aimed in two entirely different directions.
Each lite has fully adjustable arms allowing 360 degree rotation. An ideal
use of the Twin Bar Lite is for wall or sign illumination using 2 x 20 watt
lamps with an IG40 transformer for best economy.
Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lenses with high temperature silicon gaskets. The heads are mounted on a 250mm bar with twin ground spikes. Suitable for use with MR16 - 20, 35 or 50 watt lamps and is supplied with high quality European 5000 hour lamps. Click here to download Specification Sheet for Twin Bar Lite |
||
| Driveway
Lite DWL 
CLICK TO ENLARGE Prices
from £150.00 |
A
luminaire designed to mount flush with the level of the driveway, pathway,
hotel floors or building foyers - there is no lip to trip over.
The Driveway Lite is supplied with a mounting canister that facilitates ease of installation. The luminaire can be driven over or walked upon without damaging it. Designed so the lamp can be directed up at a bush, tree, or the outside of a building, etc. without the need to remove the fitting from the canister due to the three vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire. This luminaire has a solid bronze or 316 stainless steel flange with a powder coated black body.This luminaire has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. Solidly constructed body cast from aluminium with UV stable powder coat, with a ‘Flush Fit’ 10mm thick tempered glass lens and silicon gasket. The lamp can be aimed up to 20 degrees without removing the fitting from the canister. Suitable for use with MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Click
here to download Specification Sheet for Driveway
Lite |
||
| Inground
1-11 IG1-11  CLICK TO ENLARGE Prices
from £244.00 |
This luminaire is ideal for lighting large trees, palms, columns and buildings, etc.The Inground 1-11 is a flush fitting canister mount 240 volt inground up lighter designed to suit the AR1-11 lamp. The Inground 1-11 is suitable for use with 50, 75 and 100 watt lamps which have a range of beam angles from 4 to 45 degrees and is complete with its own 240 volt a.c integral power supply and thermal overload, and it is dimmable. The luminaire can be driven over (10km max) or walked upon without damaging it and it has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. The Inground 1-11 is supplied with a mounting canister that facilitates ease of installation which also allows flush mounting with the level of the ground, driveway, pathway, hotel floors or building foyers there is no lip to trip over. Designed so the lamp can be directed (up to 20 degrees) without the need to remove the luminaire from the canister due to the four vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire. Solidly constructed from a cast aluminium UV stable powder coated body, with heat dissipation fins to lower operating temperature, with a 10mm thick ‘Flush Fit’ tempered glass lens and silicon gasket. This fitting has a solid bronze or 316 stainless steel flange with a powder coated black body. Suitable for use with AR1-11 - 50 watt, 75 watt or 100 watt lamp and is supplied with a high quality European lamp. Click here to download Specification Sheet for Inground 1-11 |
||
Lawn
Lite Prices from
£105.00
|
The
Lawn Lite is designed for insertion into a lawn or garden bed and can be
mowed over without damaging it.
Designed so the lamp can be directed up to 20 degrees at a bush , tree, or the outside of a building, etc. without the need to remove the luminaire from the ground or deck due to the three vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire. The Lawn Lite has a “Flush Fit” lens which stops water pooling and depositing dirt on the lens. It is solidly constructed from cast aluminium with either a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or with a solid bronze or 316 stainless steel flange and powder coated black body.It has a 10mm thick ‘Flush Fit’ tempered glass lens and a silicon gasket. Suitable for use with an MR16 - 20 ,35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Click
here to download Specification Sheet for Lawn
Lite |
||
| Lawn
Lite Deck Mount LLDMV 
CLICK TO ENLARGE Prices
from £143.00 |
The
Lawn Lite Deck Mount version is designed to be mounted into timber decks.
The lamp can be directed up to 20 degrees at a bush, tree, or the outside of a building etc. without the need to remove the luminaire from the deck due to the three vandal-resistant 316 stainless steel allen head screw fixing system which attaches the flange to the body of the luminaire and has a solid bronze or 316 stainless steel flange with a powder coated black body. This luminaire
has a ‘Flush Fit’ lens which stops water pooling and depositing
dirt on the lens. It
is solidly constructed from cast aluminium witha UV stable powder coated
finish black body with a solid bronze or 316 stainless steel flange. Suitable for use with an MR16 - 20 , 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Click here to download Specification Sheet for Lawn Lite Deck Mount |
||
| Floor
Lite FL  CLICK TO ENLARGE Prices
from £194.00 |
The
Floor Lite has an 88mm flange which has an extremely low profile (3mm) and
can be walked upon without damaging the luminaire. There are five flange designs: A) Clover #CL B) Grill #GR C) Louvre #LU (45 degree angle) D) Spot #SP E) Cross #CR The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire. The Floor Lite is machined from 9mm thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets. This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp. A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP56 rating. Suitable for use with a MR16 - 20 watt and is supplied with a high quality European 5000 hour lamp. Click
here to download Specification Sheet for Floor
Lite |
||
| Floor
Lite Square FLSQ  CLICK TO ENLARGE Prices
from £205.00 |
The
Floor Lite Square has an 88mm x 88mm flange which has a low 7mm profile
and can be walked upon without damaging the luminaire.
There are five flange designs: A) Clover #CL B) Grill #GR C) Louvre #LU (45 degree angle) D) Spot #SP E) Cross #CR The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire. The Floor Lite is machined from 9mm thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets. This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp. A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP56 rating. Suitable for use with a MR16 - 20 watt and is supplied with a high quality European 5000 hour lamp. Click
here to download Specification Sheet for Floor
Lite
Square |
||
Links
to the Hunza Landscape Lighting Pages |
|||
|
Links
to the TLLS Collection Pages
|
|||
 |
|||
