This IP65 downlight is available in low voltage, low energy or mains voltage versions. The fitting comprises of a body to which is attached a cast bezel available in brass, polished chrome, satin chrome or white finishes - see below.

Rated at IP65 this downlight can be used in all bathroom zones 1, 2 and 3.
Click here to see Bathroom Lighting Regulations.

The dimensions of this housing are as follows:
Diameter : 80mm    Cut-Out : 64mm    Recessed Depth : 95mm

Prices above do not include the bezel or a suitable lamp
The LV095 also requires a transformer

The Cast Bezel diameter 80mm c/w with lens that attaches to the 095 body above to achieve the IP65 rating are available in 4 finishes as below:

This is a compact, and highly functional shower light.

It is designed for use with a 35mm max 35watt lamp.
Rated at IP54 it is suitable for all bathroom zones.

Requires 35mm 12v Dichroic Lamp and Transformer (both available separately).

It is available in White, Chrome, and Satin Chrome.

This highly successful shower light has an IP65 ingress protection rating. Manufactured in Aluminium it resists warping and dissipates heat efficiently. It is supplied with a mounting bracket, large connections for rapid loop-in loop-out connections, "easyfind" white terminal screws for those dark attics and a rapid ratchet cord grip.The fitting has wing clips rather than springs and a pull front release for easy lamp replacement and comes with both 12volt GX5.3 and 240volt GU/GZ10 lamp holder. The 12 volt version will require a 12v max 50watt lamp and Transformer ~ the mains version requires a GU10 max 50watt lamp and no transformer is needed.

It is available in White, Chrome, & Satin Chrome.

This Superior Die Cast IP65 downlight has a pull down bezel which is easily removable from the outer fixing for lamp replacement.
Suitable for use in bathroom zones 1, 2 and 3.

It comes with a clear glass bezel and is designed for use with a 12volt max 50watt lamp.

It is available in White, Chrome, Satin Chrome, and Polished Brass.