• The TS 1302 is a Die Cast Track Spotlight with a multidirectional beam.
• It is designed for use with a 70watt G12 CDM-TC Lamp
  A 35watt version TS 1301 using a G8.5 CDM-TC lamp is also available
  
• Width 230mm   Diam 136mm   Depth 217mm
• Available in White, Black or Silver
  
  Price: £129.95
• Also available at 35watts   E TS 1301 Price: £125.95
  
  The track adapter is suitable for single circuit mains track..
  For Track specifications and prices click here Mains Track

The SDL is constructed in aluminium.
It is available in white or silver grey and is designed to take either a 70watt or 150watt Rx7s lamp.
It is multidirectional
Dimensions :   Length 390mm x Width 250mm x Height 100mm 
Weight 70watt 4.15kg ~ 150watt 5.0kg
The fitting has built-in CONVENTIONAL ballast.
Barn doors are also available as an optional extra for this fitting - see below
The track adapter is suitable for all conventional 3 phase tracks.
For Track specifications and prices click here 3 circuit track

The prices above are exclusive of lamp ~ For Lamp prices click here

The SDL optional barn door attachment for the above fitting is constructed in aluminium.

Dimensions :   Length 380mm x Width 275mm x Height 35mm
Weight 0.5kg

Code: White W150571   Silver Grey W150572       Price £9.95

The Navigator G8.5 is constructed in aluminium.
It is only available in silver grey and is designed for a 70watt G8.5 lamp.
A reflector is required available in 4 beam angles - see below
Dimensions :   Length 375mm x Width 140mm Height 215mm 
Weight 1.85kg
The fitting has built-in ELECTRONIC ballast.
The track adapter is suitable for all conventional 3 phase tracks.
For Track specifications and prices click here 3 circuit track

The Track is of extruded aluminium with a copper core.
It is available in 1m, 2m, and 3m lengths though due to the logistics of transporting 3m lengths we suggest that 2m lengths be the maximum ordered.
It is available in black, white and silver.
Dimensions: Width 42mm Height 34mm
Conductor cross section 4mm
Maximium load per phase 16amp

Track End Cap available in Black, White or Silver
Feed in can also be made

Length / Width  34mm / 42mm

Electrical Track Connector available in Black, White or Silver
To make a straight connection between tracks

Length / Width / Height   58mm / 30mm / 25mm

Flexible Track Connector available in Black or White

Length / Width / Height   300mm / 42mm / 34mm

Eurocoupler Strengthening element for connector
Steel
Length / Width / Height   100mm / 36mm / 19mm

  £10.75

Metal halide lamps, a member of the high-intensity discharge (HID) family of lamps, produce high light output for their size, making them a compact, powerful, and efficient light source. These lamps require electrical ballasts to regulate the arc current flow and deliver the proper voltage to the arc. The ballasts are available as CONVENTIONAL magnetic or ELECTRONIC.
Electronic Ballasts are more expensive than conventional ballasts but have the following significant advantages

Lamp color & lumen output regulation
Metal halide electronic ballast has less than ± 0.5% change in output power with a ±10% variation in input line voltage, and less than ± 2.0% change in output power over the full range of accepted ansi lamp voltages. the result is excellent color stability. A typical "magnetic-lag" ballast has more than ±15% variation in output power with a ±10% variation in input line voltage, and an additional ±20% change in
output power over the full range of accepted ANSI lamp voltages; resulting in very poor fixture to fixture color stability and consistency.

Energy savings
Metal halide electronic ballast uses approximately 10% to 17% less energy than a " magnetic" ballast.

Improved lumen maintenance
Typically, a Metal halide electronic ballast extends lamp lumen maintenance from 5% to 15% versus a "magnetically" ballasted lamp.

Small size & light weight
Metal halide electronic ballast is compact with extremely small and lightweight designs compared to large, heavy magnetic ballasts.

Heat losses
Metal halide electronic ballast has a higher efficiency and therefore much lower heat losses than magnetic ballasts.

One piece assembly
Metal halide electronic ballast replaces the ballast, capacitor, and the ignitor of the "magnetic" ballast systems in one integrated unit.

High power factor
Metal halide electronic ballast has a power factor greater than 0.95, much higher than that of a "magnetic" ballast.

Quiet operation
Metal halide electronic ballasts are sound rated "A" for quiet operation in interior commercial applications.

To summerise the advantages of Electronic vs Convention Gear
Compact and Lightweight / Fast Start / Same Ballast for Metal Halide and SON / Remote Operation to 25m / Safety features for all Lamp Faults
Heat Noise and Flicker Free / Energy Saving of up to 22% / Enhanced Lamp Life / Constant Colour and Power / Excellent Colour Rendering

Whether choosing a fitting that requires the G12 or G8.5 capsule lamp, or the Rx7s double ended lamp, there is still another choice to be made: bto buy a lamp with a quartz burner or a ceramic burner.

The principle benefits of ceramic metal halide are 3 fold, by using ceramic instead of quartz to contain the arc it allows the lamp engineer major opportunities to improve the performance of these lamp types.
1. The ceramic can run at a much higher temperature, usually about 1050OC, this higher temperature, gives a couple of benefits.
• The higher the temperature the higher the CRI (colour rendering index), so this drives some of the improvement and gives us CRI of between 80 & 95 dependent upon the colour temperature ie the ceramic gives excellent colour rendering.
• This ability to run at higher temperatures also makes the system much more efficient, the 15% improvement we see versus quartz made products is based on the ability of the ceramic to withstand this.
2. The additional benefit is the ceramic’s resistance to sodium lose through life, as mentioned earlier the quartz allows chemicals to disperse through the walls, ceramic being a more dense material is much more resistive to this and hence gives us excellent colour control through life.
3. Reproducibility is key to consistent product performance, this is another area that works well with ceramic products, the ceramic can be manufactured and assembled to very tight tolerances unlike the quartz equivalents which by the nature of their processing can have quite wide variation

To summerise Ceramic Metal Halide gives a higher efficiency, a quality white light with excellent colour reproduction, and exceedingly good reproducibility allowing very consistent colour, not just lamp to lamp but throughout the lifespan of each lamp.
The lamps also enjoy a much longer lamp life than those with a quartz burner lasting at least twice as long.