The Lighting Site - Transformers

Ordering & Delivery

Exhibition Lighting

Retail Lighting

All these electronic transformers are variable and dimmable with both trailing and leading edge dimmers.
They supply a soft start to prolong lamp life and are protected against short circuit, overload and mains surge.
They also have a thermal fuse to prevent damage in the case of overheating.

Click image to enlarge

DA-J60 Transformer

11.4volt output 20-60va Transformer
Fully dimmable with resistive & inductive dimmers.
1.0kV surge protection – EN 61547 Pre-wired with 20cm primary lead
20cm heat resistant secondary leads. Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547

3 Year guarantee
L=75mm W= 37mm H=23mm

£3.95

Buy me now at

AU 60TA Transformer
11.4volt output 20-60va Transformer. Output frequency 40kHz
Fully dimmable with resistive and inductive dimmers - min dimming load 35watts
Auto reset thermal protection 1.0kV Surge Protection
Loop in/Loop out Primary wiring terminals
Integrated Earth Terminal for Earth continuity - no junction box required

10 year guarantee
L=110mm H=24mm W=40mm Weight 0.085Kg

£6.95

Buy me now at

105va Electronic Transformers multiple output

Click image to enlarge

dAU A2 105 Transformer

11.4volt output 35-105va electronic transformer. Output frequency 30kHz
Fully dimmable with resistive and inductive dimmers
Loop-in, loop-out primary wiring terminals Integrated earth terminal for earth continuity
No junction box required. Secondary wiring terminals - 3 outputs
Thermal fuse. 1.0kV surge protection EN 61547
Safety compliance EN 61347 EMC compliance - EN 55015, EN 61000, EN 61547

5 year guarantee
L=144mm W= 38mm H=26mm Weight=0.123 Kg

£10.95

Buy me now at

Click image to enlarge

AU E105 Transformer

11.4volt output 35-105va electronic transformer. Output frequency 30kHz
Fully dimmable with resistive & inductive dimmers. Auto-reset thermal protection
1.0kV surge protection – EN 61547. 'Loop-in, Loop-out' primary wiring terminals
Integrated earth terminal for earth continuity. No junction box required
Secondary wiring terminals - 3 outputs. Maximum load on one output - 105VA
(Up to max.load of transformer) Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547

5 year guarantee
L=145mm H=25mm W=38mm Weight=0.116 Kg

£13.25

Buy me now at

150va Electronic Transformers multiple output

Click image to enlarge

AU 150 Transformer

11.4volt output 50-150va electronic transformer. Output frequency 22kHz
Loop-in, loop-out primary wiring terminals. Integrated earth terminals for earth continuity.
No junction box required. Secondary wiring terminals - 3 outputs
Maximum load on one output - 105va

10 year guarantee
L=145mm H=28mm W=43mm Weight=0.162 Kg

£19.25

Buy me now at

210va Electronic Transformers multiple output

Click image to enlarge

AU 210 Transformer

11.4volt output 50-210va electronic transformer. Output frequency 22kHz
Fully dimmable with resistive & inductive dimmers. Auto-reset thermal protection
1.0kV surge protection – EN 61547. Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547
Loop-in, loop-out primary wiring terminals. ntegrated earth terminals for earth continuity
No junction box required. Secondary wiring terminals - 4 outputs
Maximum load on one output - 105va

10 year guarantee
L=164mm H=32mm W=46mm Weight=0.269 Kg

£28.95

Buy me now at

Single Output Electronic Transformers

Click image to enlarge

# Fully dAU RD60 Transformer

11.4volt output 35-60va electronic transformer. Output frequency 43kHz
Fully dimmable single output transformer for both resistive & inductive dimmers.
For integration into luminaires or surface mounting.
Suitable for use in floor/desk lamp bases or low voltage plate lights
1.0kV surge proection– EN 61547 Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547.
Wiring terminals – 1 input / 1 output
Auto-reset thermal protection

10 year guarantee

Diam = 76mm Height = 25mm ~ Central Hole for 10mm bolt

£9.25

Buy me now at

Click image to enlarge

AU RD105 Transformer

11.4volt output 35-105va electronic transformer. Output frequency 34kHz
Fully dimmable single output transformer for both resistive & inductive dimmers.
For integration into luminaires or surface mounting.
Suitable for use in floor/desk lamp bases or low voltage plate lights
1.0kV surge proection– EN 61547 Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547.
Wiring terminals – 1 input / 1 output
Auto-reset thermal protection

10 year guarantee

Diam = 86mm Height = 25mm ~ Central Hole for 10mm bolt

£11.75

Buy me now at

Click image to enlarge

AU RD150 Transformer

11.4volt output 50-150va electronic transformer. Output frequency 26kHz
Fully dimmable single output transformer for both resistive & inductive dimmers.
For integration into luminaires or surface mounting.
Suitable for use in floor/desk lamp bases or low voltage plate lights
1.0kV surge proection– EN 61547 Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547.
Wiring terminals – 1 input / 1 output
Auto-reset thermal protection

10 year guarantee

Diam = 105mm Height = 25mm ~ Central Hole for 10mm bolt

£17.50

Buy me now at

Click image to enlarge

AU RD210 Transformer

11.4volt output 50-210va electronic transformer. Output frequency 25kHz
Fully dimmable single output transformer for both resistive & inductive dimmers.
For integration into luminaires or surface mounting.
Suitable for use in floor/desk lamp bases or low voltage plate lights
1.0kV surge proection– EN 61547 Safety compliance – EN 61347
EMC compliance – EN 55015, EN 61000, EN 61547.
Wiring terminals – 1 input / 1 output
Auto-reset thermal protection

10 year guarantee

Diam = 110mm Height = 25mm ~ Central Hole for 10mm bolt

£25.25

Buy me now at

Click image to enlarge

AU 150SS Transformer

11.4volt output 50-150va electronic transformer. Output frequency 22kHz
Single output transformer - suitable for use with low voltage track systems etc or where the full load is required from one output. Fully dimmable with resistive & inductive dimmers.
Auto-reset thermal protection 1.0kV surge protection – EN 61547
Safety compliance – EN 61347, EMC compliance – EN 55015, EN 61000, EN 61547
Loop-in, loop-out primary wiring terminals. Integrated earth terminal for earth continuity
No junction box required. Secondary wiring terminals - 1 output. Max 4.0mm²

10 year guarantee
L=145mm H=28mm W=43mm Weight=0.168 Kg

£16.50

Buy me now at

Click image to enlarge

AU 210SS Transformer

11.4volt output 50-210va electronic transformer. Output frequency 22kHz
Single output transformer - suitable for use with low voltage track systems etc or where the full load is required from one output. Fully dimmable with resistive & inductive dimmers
Auto-reset thermal protection 1.0kV surge protection – EN 61547
Safety compliance – EN 61347, EMC compliance – EN 55015, EN 61000, EN 61547
Loop-in, loop-out primary wiring terminals. Integrated earth terminal for earth continuity
No junction box required. Secondary wiring terminals - 1 output. Max 4.0mm²

10 year guarantee
L=164mm H=32mm W=46mm Weight=0.248 Kg

£26.95

Buy me now at

Click for larger image

EMC ET300

Housed in a smart grey plastic housing to blend in with aluminium finishes. Ideal for 12volt Track or Rope Lighting up to 6m in length. Also available in white or black finish.

180mm diameter 70mm depth

This electronic Transformer is designed for upto 300watts. It is dimmable by leading edge 400watt dimmer switches. It has automatic overload, short circuit, overheating, overcurrent and thermal protection.

For further technical information click here TECHNICAL INFORMATION

EMC EMS300 300va £104.95

Toroidal Designer Transformers

These transformers are not variable so the load needs to match the output.
They can be dimmed but the dimmer must be designed for use with an inductive load.

EMC UFO 870 01
This Toroidal Transformer is housed in a stylish lightweight aluminium case with a silver finish. Available only at 300va is has auto resetting, thermal short circuit and overload protection.
Size 180mm x 72mm

EMC UFO 870 01 300va £119.95

Click image to enlarge

MANTA TRANSFORMER
This transformer is housed in a steel case available in white, silver grey or chrome finishes. Available at 100va, 200va or 300va is has short circuit protection and is Semco tested.

These transformers should always be working to 80% of their capacity.

They can be dimmed using trailing or leading edge dimmers
When dimmed a minor operating noise can be possible.

Code	Description	Wattage	Diameter	Depth	Price
W455209	Manta 200 Silver Grey	200va	20cm	8cm	£97.50
W455202	Manta 200 Chrome	200va	20cm	8cm	£97.50
W455309	Manta 300 Silver Grey	300va	20cm	9cm	£130.00
W455309	Manta 300 Chrome	300va	20cm	9cm	£130.00

WAVE W138812 / 138822
This transformer is housed in a steel case with a polished chrome finish. Available at 100va or 200va is has thermal, short circuit and overload protection.

100va W138812 Size 125mm x 95mm 1.7Kg
200 va W138822 Size 155mm x 115mm 2.6Kg

WAVE W138812 100va £64.95 WAVE W138822 200va £97.50

Conventional Toroidal Transformers

ROUND TOROIDAL 20va Transformer W451021

This transformer is housed in a plastic housing and rated at IP40.
It has 25cm connection leads on the primary and secondart terminals.

Max output 20watts - use at at least 80% of this max load

Size: 65mm x 50mm Weight: 0.48Kg

W451021 Price £19.50

ROUND TOROIDAL 35va Transformer W451022

This transformer is housed in a plastic housing and rated at IP40.
It has 25cm connection leads on the primary and secondart terminals.

Max output 35watts - use at at least 80% of this max load

Size: 80mm x 57mm Weight: 0.75Kg

W451022 Price £22.75

Code	Max Load	Length	Width	Height	Weight	Price
W451060	60va	6cm	10cm	6.3cm	1.25kg	£19.75
W451105	105va	11cm	7.5cm	8cm	2.5kg	£32.75
W451150	150va	8cm	11cm	8cm	2.2kg	£45.50
W451250	250va	9cm	13cm	10.5cm	3.1kg	£52.25
W451301	300va	9cm	13cm	11cm	3.9kg	£84.25

W451300	300va	9cm	13cm	11cm	2.7kg	£129.75
The W451300 above has a 2m primary lead and 6 separately protected output clamps

These transformers have a white plastic housing and are preleaded with 25cm of cable on both the primary input and the secondary output.
They should only be used between full load and to a minimum of 80% of full load.